串口驅動(Serial Drivers)編寫實例解讀(連載:一)
[代碼步驟:Code Steps]
。初始化
。定義支持的串口通道數
。初始化驅動的設備描述
。寫你的設備初始化代碼
。寫入口程序(entry point routines)
。寫ISRs（中斷服務程序）來管理設備
。使用模板 wind/target/src/drv/ssio/templateSio.c

注意:串口驅動在VxWorks系統開始的代碼里初始化

[設備描述:The Device Descriptor]
。XX_DRV結構每個通道有一個XX_CHAN
。每個XX_CHAN指向SIO_DRV_FUNCS
。SIO_DRV_FUNCS引誘驅動的入口（entry point）

。XX_DRV是xxDrv使用的中心數據結構
。xx_CHAN包括:
。xxDrv需要的通道特定信息
。指向驅動SIO_DRV_FUNCS結構的指針
。例：
/* device and channel structures */

typedef struct
{
/* must be first */

SIO_CHAN sio; /* standard SIO_CHAN element */

/* callbacks */

STATUS (*getTxChar) ();
STATUS (*putRcvChar) ();
void * getTxArg;
void * putRcvArg;

/* register addresses */

volatile char * cr; /* channel control register */
volatile char * dr; /* channel data register */
volatile char * sr; /* channel status register */
volatile char * ms; /* channel modem status register */
volatile char * mc; /* channel modem control register */
volatile short * br; /* channel baud constant register */

/* misc */

int mode; /* current mode (interrupt or poll) */
int baudFreq; /* input clock frequency */
int options; /* Hardware options */
} TEMPLATE_CHAN;

typedef struct
{
TEMPLATE_CHAN portA; /* DUSRAT has two channels */
TEMPLATE_CHAN portB;
volatile char * masterCr; /* master control register */
} TEMPLATE_DUSART;

[SIO_CHAN結構]
。對一般字符驅動，一個指向DEV_FDR的指針被用來在驅動和I/O system 之間通訊
。對一個串口驅動，一個指向SIO_CHAN的指針用來在驅動和高層協議之間通訊

在 wind/target/h/sioLib.h；里,SIO_CHAN如下定義:
typedef struct sio_chan/* a serial channel */
{
SIO_DRV_FUNCS * pDrvFuncs;
/* device data */
} SIO_CHAN;

.由于高層協議不知道驅動的XX_CHAN結構,SIO_CHAN被用來允許一個精心定義的數據類型在協議間交換數據
.ttyDrv通過SIO_DRV_FUNCS里的入口向xxDrv發送信息，而xxDrv通過回調向ttyDrv發送信息
[入口：Entry Points]
xxCallBackInstall() 安裝到高層協議的入口(I/O system,target agent(目標代理),等等)
xxPollOutPut() 輪巡模式輸出
xxPollInput() 輪巡模式輸入
xxIoctl() 支持設備特定的ioctl命令
xxTxStaartup() 初始化一個傳輸循環(transmit cycle)

[驅動回調安裝程序]
int xxCallbackInstall(pSsioChan,callbackType,callback,callbbackArg)
pSioChan 指向SIO_CHAN的指針
callbackType SIO_CALLBACK_GET_TX_CHAR 或 SIO_CALLBACK_PUT_RCV_CHAR
callback 指向回調程序的指針
callbackArg 回調的參數
。初始化SIO_CHAN結構里的特定成員
。返回OK 或 ENOSYS(當callbackType不是上兩種中的一種)
/********************************************************************************
templateCallbackInstall - install ISR callbacks to get/put chars
This driver allows interrupt callbacks for transmitting characters
and receiving characters. In general, drivers may support other
types of callbacks too.
*
* RETURNS: OK on success, or ENOSYS for an unsupported callback type.*/
LOCAL int templateCallbackInstall
(
SIO_CHAN * pSioChan, /* channel */
int callbackType, /* type of callback */
STATUS (*callback)(), /* callback */
void * callbackArg /* parameter to callback */
)
{
TEMPLATE_CHAN * pChan = (TEMPLATE_CHAN *)pSioChan;

switch (callbackType)
{
case SIO_CALLBACK_GET_TX_CHAR:
pChan->getTxChar = callback;
pChan->getTxArg = callbackArg;
return (OK);

case SIO_CALLBACK_PUT_RCV_CHAR:
pChan->putRcvChar = callback;
pChan->putRcvArg = callbackArg;
return (OK);

default:
return (ENOSYS);

}
}
[驅動初始化]
。參數是沒一個指向XX_DRV的指針
。初始化XX_CHAN
。帶你的程序的SIO_DRV_FUNCS
?？芑卣{(diào)
。所有設備特定
。重啟芯片
/* local variables */

LOCAL SIO_DRV_FUNCS templateSioDrvFuncs =
{
templateIoctl,
templateTxStartup,
templateCallbackInstall,
templatePollInput,
templatePollOutput
};
void templateDevInit
(
TEMPLATE_DUSART * pDusart
)
{
/* initialize each channel"s driver function pointers */

pDusart->portA.sio.pDrvFuncs = templateSioDrvFuncs;
pDusart->portB.sio.pDrvFuncs = templateSioDrvFuncs;

/* install dummy driver callbacks */

pDusart->portA.getTxChar = dummyCallback;
pDusart->portA.putRcvChar = dummyCallback;
pDusart->portB.getTxChar = dummyCallback;
pDusart->portB.putRcvChar = dummyCallback;

/* reset the chip */

TEMPLATE_REG_WRITE(pDusart, masterCr,
TEMPLATE_RESET_CHIP);

/* setting polled mode is one way to make the device quiet */

templateIoctl ((SIO_CHAN *)pDusart->portA, SIO_MODE_SET,
(void *)SIO_MODE_POLL);
templateIoctl ((SIO_CHAN *)pDusart->portB, SIO_MODE_SET,
(void *)SIO_MODE_POLL);
}
/*******************************************************************************
*
* dummyCallback - dummy callback routine
*
* RETURNS: ERROR.
*/

LOCAL STATUS dummyCallback (void)
{
return (ERROR);
}
linux操作系統文章專題:linux操作系統詳解（linux不再難懂）