OutPortCom3( (unsigned char)(StartAddr), (unsigned char)(StartAddr>>8), 0x24); //set address
for(j=0;jLineWidth;j++)
{
OutPortCom2( CBYTE[address + i*LineWidth+ j ], 0xc0);
}
StartAddr=StartAddr + LineChar;
}
}

///////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
//圖形函數,用于描點畫圖
//---------------------------------------------------------------------------
//在指定位置顯示一個點
//如果顯示屏超過了256*256,請修改這個函數 PointX,PointY的類型
//Mode 1:顯示 0:清除該點
Pixel(unsigned char PointX,unsigned char PointY, bit Mode)
{
unsigned int StartAddr=0;
unsigned char dat;

StartAddr=PointX*LineChar + PointY/8;
dat=0xf0+7-PointY%8;
if(Mode) dat=dat 0x08;

OutPortCom3( (unsigned char)(StartAddr),(unsigned char)(StartAddr>>8),0x24 ); //設置該點所在單元地址
OutPortCom1(dat);
}

//-------------------------------------------------------------------------------
//劃線函數
void Line( unsigned char x1, unsigned char y1, unsigned char x2, unsigned char y2, bit Mode)
{
unsigned char x,y;
double k,b;

if( abs(y1-y2) = abs(x1-x2) ) // k =1
{
k=(float)(y2-y1) / (float)(x2-x1) ;
b=y1-k*x1;

if( x1 = x2 )
{
for(x=x1;x=x2;x++)
{
y=k*x+b;
Pixel(x, y, Mode);
}
}
else
{
for(x=x2;x=x1;x++)
{ y=k*x+b;
Pixel(x, y, Mode);
}
}
}
else // abs(y1-y2) > abs(x1-x2) K >1
{
k=(float)(x2-x1) / (float)(y2-y1) ;
b=x1-k*y1;

if( y1 = y2 )
{
for(y=y1;y=y2;y++)
{ x=k*y+b;
Pixel( x , y,Mode );
}
}
else
{
for(y=y2;y=y1;y++)
{ x=k*y+b;
Pixel( x , y,Mode );
}
}
}
}

/*--------------------------------------------------------------------------------------*/
void ClearScreen()
{

unsigned int i;
///////// 清顯示 RAM 區 0000h--2000h (8k)
OutPortCom3(0x00,0x00,0x24); //設置指針地址0000H

OutPortCom1(0xb0); //設置自動寫狀態
for(i=0x00;i0x2000;i++) OutPortData(0x00); // data=0;
OutPortCom1(0xb2); // 自動寫結束
}

//初始化LCD
//需要手動設置
void InitLCD()
{
OutPortCom3( 0x00,0x00,0x42 ); //設置圖形顯示區域首地址GraphAddr
OutPortCom3( 30,0x00,0x43 ); //設置圖形顯示區域?qū)挾?: LineChar

// OutPortCom3( 0x00,0x00,0x42 ); //設置圖形顯示區域首地址GraphAddr
// OutPortCom3( 0x10,0x00,0x43); //設置圖形顯示區域?qū)挾?10H

OutPortCom1(0xa7); //設置光標形狀 cursor size 8x8
OutPortCom1(0x80); //設置顯示方式: CGROM方式 文本圖形 "或"
OutPortCom1(0x98); //設置顯示開關: 1001 1100 圖形

ClearScreen();
}

T6963C 引腳說明
T6963C 的QFD 封裝共有67 個引腳，各引腳說明如下：
1、D0－D7：T6963C 與MPU 接口的數據總線，三態。