中文字幕 另类精品,亚洲欧美一区二区蜜桃,日本在线精品视频免费,孩交精品乱子片免费

<sup id="3hn2b"></sup>

    1. <sub id="3hn2b"><ol id="3hn2b"></ol></sub><legend id="3hn2b"></legend>

      1. <xmp id="3hn2b"></xmp>

      2. 關 閉

        新聞中心

        EEPW首頁 > 工控自動化 > 設計應用 > TI TPS24720 2.5V-18V熱插拔控制方案

        TI TPS24720 2.5V-18V熱插拔控制方案

        作者: 時間:2011-05-23 來源:網絡 收藏

        公司的 是容易使用全特性保護的熱插拔器.器件驅動外接N溝MOSFET,起動時能精確地限流,可編程FET SOA保護,可調整電流檢測閾值,短路時具有快速中斷保護,工作電壓2.5V到18V,主要用在服務器背板,存儲區域網(SAN),通信子板,醫療系統,插入模塊和基站.本文介紹了主要特性, 方框圖,10A時12V的典型應用電路圖以及評估模塊EVM-001主要特性,電路圖和材料清單與PCB布局圖.

        The TPS24720 is an easy-to-use, full-featured protection device for 2.5-V to 18-V power rails. This hot-swap controller drives an external N-channel MOSFET, while protecting source, load and external MOSFET against multiple potentially damaging events. During startup, load current and MOSFET power dissipation are limited to user-selected values. After startup, currents above the user-selected limit will be allowed to flow until programmed timeout – except in extreme overload events when load is immediately disconnected from source.

        Programmable power limiting ensures the external MOSFET operates inside its safe operating area (SOA) at all times. This allows use of smaller FETs while improving system reliability.

        TPS24720主要特性:

        2.5-V to 18-V Operation

        Accurate Current Limiting for Startup

        Programmable FET SOA Protection

        Adjustable Current Sense Threshold

        Programmable Fault Timer

        Power-Good Output

        Fast Breaker for Short-Circuit Protection

        Analog Load-Current Monitor Output

        Programmable UV and OV

        Low-current Standby Mode

        FET Fault Detection Flag

        3-mm × 3-mm, 16-Pin QFN package

        TPS24720應用:

        Server Backplanes

        Storage Area Networks (SAN)

        Telecommunications Mezzanine Cards

        Medical Systems

        Plug-In Modules

        Base Stations


        圖1.TPS24720方框圖

        圖2.TPS24720典型應用電路圖(12V/10A)

        圖3.TPS24720設計案例中簡化方框圖

        評估模塊TPS24720EVM-001

        The TPS24720EVM-001 is a fully assembled and tested circuit for evaluating the TPS24720 Positive Voltage Power-Limiting Hotswap Controller. The evaluation module is a 12V, 25A hot swap controller operating in latch off or re-try mode with an external MOSFET.

        評估模塊TPS24720EVM-001主要特性:

        +2.5V to +20V Operation

        Programmable Power Limit for FET Protection

        Programmable Fault Timer

        Load Current Indicator Output

        High-side Drive for External NFET

        Power Good Output - Open-Drain

        UV, OV Inputs

        16-pin QFN


        上一頁 1 2 下一頁

        關鍵詞: 方案 控制 2.5V-18V TPS24720 TI

        評論


        相關推薦

        技術專區

        關閉